|
|
JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >
このアイテムの引用には次の識別子を使用してください:
http://hdl.handle.net/10119/10628
|
| タイトル: | Photocurable Electrolyte Based on Sulfonated Poly (ether ether ketone) |
| 著者: | Nagao, Yuki
Iwadera, Tomoaki
Sata, Noriko
Iguchi, Fumitada
Yugami, Hiroo |
| キーワード: | Fuel Cell
Photoculable Electrolyte
Polymer
Patterned Structure
MEMS |
| 発行日: | 2011-10-29 |
| 出版者: | Elsevier |
| 誌名: | Solid State Ionics |
| 巻: | 204-205 |
| 開始ページ: | 35 |
| 終了ページ: | 40 |
| DOI: | 10.1016/j.ssi.2011.09.013 |
| 抄録: | Photocurable electrolytes were prepared by mixing proton conductive polymer sulfonated poly(ether ether ketone) (SPEEK), cross-linking monomer divinyl sulfone (DVS), photoinitiator phenylbis(2,4,6-trimethylbenzoyl)phosphineoxide (PI), dimethylacetamide (DMA), and ethanol. To investigate the proton transport property, a series of photocurable electrolytes with various PI content ratios were prepared to form photocured membranes. Water uptake, ion exchange capacity (IEC), proton conductivity, and water-resistance of the photocured membranes were investigated. Water-resistant photocured membrane is easy to prepare, which gives relatively high proton conductivity (28 mS cm^<-1> under 70 ℃ and relative humidity of 90 %). Patterning of micro-structure on the photocured membrane was also demonstrated by using the property of the photocurable electrolytes. |
| Rights: | NOTICE: This is the author's version of a work accepted for publication by Elsevier. Yuki Nagao, Tomoaki Iwadera, Noriko Sata, Fumitada Iguchi, Hiroo Yugami, Solid State Ionics, 204-205, 2011, 35-40, http://dx.doi.org/10.1016/j.ssi.2011.09.013 |
| URI: | http://hdl.handle.net/10119/10628 |
| 資料タイプ: | author |
| 出現コレクション: | c10-1. 雑誌掲載論文 (Journal Articles)
|
このアイテムのファイル:
| ファイル |
記述 |
サイズ | 形式 |
|---|
| 17702.pdf | | 342Kb | Adobe PDF | 見る/開く |
|
当システムに保管されているアイテムはすべて著作権により保護されています。
|
