|
JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >
このアイテムの引用には次の識別子を使用してください:
http://hdl.handle.net/10119/12913
|
| タイトル: | Control of work function of indium tin oxide: A surface treatment by atmospheric-pressure plasma layer on fabric-type electrodes |
| 著者: | Ueda, Yoshihiko
Abe, Junichi
Murata, Hideyuki
Gotoh, Yasuhito
Sakai, Osamu |
| 発行日: | 2014-03-05 |
| 出版者: | IOP Publishing |
| 誌名: | Japanese Journal of Applied Physics |
| 巻: | 53 |
| 号: | 3S2 |
| 開始ページ: | 03DG03-1 |
| 終了ページ: | 03DG03-6 |
| DOI: | 10.7567/JJAP.53.03DG03 |
| 抄録: | The surface electronic properties of metal oxides, which affect the performances of layered electronic devices, are controlled by non-thermal atmospheric-pressure plasmas generated using a fabric-type electrode and gas flow induced through this plasma layer. We specify a method to control the work function of indium tin oxide (ITO) films by this plasma, in which such reactive species as oxidant radicals are generated. These oxidants are spatially transported in the gas flow to the ITO surface and increase the ITO's work function, as verified in our experimental results. To examine the effects of the increased work function in a specific electronic device, we treat the surface of an ITO electrode in an organic light-emitting diode and observe the enhancement of the light-emitting efficiency. |
| Rights: | This is the author's version of the work. It is posted here by permission of The Japan Society of Applied Physics. Copyright (C) 2014 The Japan Society of Applied Physics. Yoshihiko Ueda, Junichi Abe, Hideyuki Murata, Yasuhito Gotoh, and Osamu Sakai, Japanese Journal of Applied Physics, 53(3S2), 2014, 03DG03-1-03DG03-6. http://dx.doi.org/10.7567/JJAP.53.03DG03 |
| URI: | http://hdl.handle.net/10119/12913 |
| 資料タイプ: | author |
| 出現コレクション: | c10-1. 雑誌掲載論文 (Journal Articles)
|
このアイテムのファイル:
| ファイル |
記述 |
サイズ | 形式 |
|---|
| 21121.pdf | | 492Kb | Adobe PDF | 見る/開く |
|
当システムに保管されているアイテムはすべて著作権により保護されています。
|
