JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >

このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/10119/16753

タイトル: Effect of carbon nanotube addition on structure and properties for extrudates of high‐density polyethylene
著者: Nishikawa, Riho
Yamaguchi, Masayuki
発行日: 2019-06-03
出版者: Wiley Periodicals
誌名: Journal of Applied Polymer Science
巻: 136
号: 40
開始ページ: 48010-1
終了ページ: 48010-8
DOI: 10.1002/app.48010
抄録: We investigated the structure and properties of strands of high-density polyethylene (HDPE), containing multi-walled carbon nanotubes (MWCNTs) extruded from a capillary rheometer. Surprisingly, we found that the MWCNTs enhanced the chain orientation of HDPE, and that in the absence of MWCNTs, orientation relaxation occurred in the HDPE immediately after passing through the die. Conventional differential scanning calorimetry measurements indicated that MWCNT acts as a nucleating agent and raises the crystallization temperature 2 - 4 °C under quiescent condition. In the flow field, oriented MWCNTs behave like polymeric chain extended crystals “shish”, and greatly accelerate the flow-induced crystallization of the HDPE “kebab”. Consequently, the modulus was significantly increased in the flow direction. These findings demonstrate that the addition of MWCNTs is an effective method of enhancing the rigidity of HDPE.
Rights: Copyright (C) 2019 Wiley Periodicals. Riho Nishikawa, Masayuki Yamaguchi, Journal of Applied Polymer Science, 136(40), 2019, 48010, which has been published in final form at [http://dx.doi.org/10.1002/app.48010]. This article may be used for non-commercial purposes in accordance with the Wiley Self-Archiving Policy [http://www.wileyauthors.com/self-archiving].
URI: http://hdl.handle.net/10119/16753
資料タイプ: author
出現コレクション:c10-1. 雑誌掲載論文 (Journal Articles)

このアイテムのファイル:

ファイル 記述 サイズ形式
161.pdf1276KbAdobe PDF見る/開く

当システムに保管されているアイテムはすべて著作権により保護されています。

 


お問い合わせ先 : 北陸先端科学技術大学院大学 研究推進課図書館情報係