JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >

このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/10119/7934

タイトル: Multi-Layer Polymer Light-Emitting Diodes Prepared by Vapor Deposition Polymerization of Polyazomethine Thin Film
著者: Itabashi, Atsushi
Fukushima, Masao
Murata, Hideyuki
キーワード: vapor deposition polymerization
polymer light-emitting diodes
polyazomethine
low annealing temperature
π-conjugated polymer
発行日: 2008-02-15
出版者: The Japan Society of Applied Physics
誌名: Japanese Journal of Applied Physics
巻: 47
号: 2
開始ページ: 1271
終了ページ: 1275
DOI: 10.1143/JJAP.47.1271
抄録: A novel polyazomethine (PAM) thin film deposited by vapor deposition polymerization (VDP) process was used in the emissive layer of polymer light-emitting diodes (PLEDs). 1,4-bis(4-formylstyryl)benzene (BFSB) and 4,4''-diamino-(1,1',4',1'')-terphenyl (DAT) were co-deposited to form PAM thin films at various substrate temperatures. Fluorescent quantum yield of novel PAM synthesized by using BFSB monomer increased one order of magnitude compared with the previous report. PLEDs with the device structure of ITO /PEDOT:PSS (100 nm)/PAM (140 nm)/LiF (0.5 nm)/Al (80 nm) exhibited of electroluminescence from the PAM layer for the first time. The characteristics of PLEDs suggest the electron mobility of PAM is higher than hole mobility.
Rights: This is the author's version of the work. It is posted here by permission of The Japan Society of Applied Physics. Copyright (C) 2008 The Japan Society of Applied Physics. Atsushi Itabashi, Masao Fukushima, Hideyuki Murata, Japanese Journal of Applied Physics, 47(2), 2008, 1271-1275. http://jjap.ipap.jp/link?JJAP/47/1271/
URI: http://hdl.handle.net/10119/7934
資料タイプ: author
出現コレクション:c10-1. 雑誌掲載論文 (Journal Articles)

このアイテムのファイル:

ファイル 記述 サイズ形式
C10652.pdf225KbAdobe PDF見る/開く

当システムに保管されているアイテムはすべて著作権により保護されています。

 


お問い合わせ先 : 北陸先端科学技術大学院大学 研究推進課図書館情報係