|
JAIST Repository >
c. マテリアルサイエンス研究科・マテリアルサイエンス系 >
c10. 学術雑誌論文等 >
c10-1. 雑誌掲載論文 >
このアイテムの引用には次の識別子を使用してください:
http://hdl.handle.net/10119/4534
|
| タイトル: | Surface modification of Bi-Sr-Ca-Cu-O films deposited in situ by radio frequency plasma flash evaporation with a scanning tunneling microscope |
| 著者: | Terashima, Kazuo
Kondoh, Minoru
Takamura, Yuzuru
Komaki, Hisashi
Yoshida, Toyonobu |
| 発行日: | 1991-08-05 |
| 出版者: | American Institute of Physics |
| 誌名: | Applied Physics Letters |
| 巻: | 59 |
| 号: | 6 |
| 開始ページ: | 644 |
| 終了ページ: | 646 |
| DOI: | 10.1063/1.105379 |
| 抄録: | The surface modifications of as-grown superconducting Bi-Sr-Ca-Cu-O (BSCCO) films prepared by radio frequency plasma flash evaporation were carried out with a scanning tunneling microscope (STM). The as-grown films were identified as highly c-axis-oriented, low T_c (80 K) phase Bi_2Sr_2Ca_1Cu_2O_x with some residue such as (Sr,Ca)_3Cu_5O_x from x-ray diffraction patterns. The as-grown film deposited at about 750 °C exhibited a superconducting critical temperature T_c of 76 K and a critical current density J_c of 8.8×10^4 A/cm^2 under zero magnetic field at 27 K. The nanometer-size surface modifications between 2 and 50 nm, especially layered etching, of the prepared BSCCO films were successfully performed by using a STM in air. |
| Rights: | Copyright 1991 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in K. Terashima, M. Kondoh, Y. Takamura, H. Komaki, T. Yoshida, Applied Physics Letters, 59(6), 644-646 (1991) and may be found at http://link.aip.org/link/?APPLAB/59/644/1 |
| URI: | http://hdl.handle.net/10119/4534 |
| 資料タイプ: | publisher |
| 出現コレクション: | c10-1. 雑誌掲載論文 (Journal Articles)
|
このアイテムのファイル:
| ファイル |
記述 |
サイズ | 形式 |
|---|
| 3980.pdf | | 363Kb | Adobe PDF | 見る/開く |
|
当システムに保管されているアイテムはすべて著作権により保護されています。
|
